Get answers to commonly asked questions about our various products. If you don't find the answer you're looking for, feel free to give us a call (1-877-665-6705) or send an email.
General:
Q. Where can I purchase your products?
A. There are 3 ways to order. You can order online, over the phone or through an authorized dealer (which you can find by doing a
zip code search on our dealer page).
Headache Racks:
Q. Will Spyder Headache racks fit with a tonneau cover?
A. It will fit with any inside bed rail tonneau cover. Just be sure to order your rack with the 10" standard (tonneau compatible)
mounting brackets.
Q. Can you mount a tool box with a spyder headache rack?
A. Yes. Be sure to order your headache rack with the 24" toolbox compatible mounting brackets.
Q. What type of material is used to make the web insert?
A. Our web, deer, and elk are cut out of mild steel plate.
Q. How much weight will a headache rack hold?
A. We recommend no more than 350 pounds of forward leaning weight and 1500 pounds of weight directly on top of the rack.
Q. How long does it take to install the Headache Rack?
A. About 15-30 minutes.
Q. What kind of tools do I need to have for the installation?
A. The only tools you need are a ½” open end wrench and ½” socket.
Bull Bars:
Q. Can the Bull Bars be adjusted closer or further away from the front of the truck?
A. Yes, there is approximately 5" of movement to tilt it out away from or closer to your truck.
Q. How much time does it take to install a Bull Bar?
A. Varies according to model, but usually 15 minutes to one hour.
Q. What kind of tools do I need to have for the installation?
A. We recommend having a full socket and box wrench set available. In some instances it may be necessary to loosen surrounding
parts to ease installation.
Q. Is there any drilling or does it bolt up in pre-existing holes?
A. No drilling involved. Our bull bar will mount using factory holes and attachment points.
Q. How many places are there for lights?
A. There are four holes for mounting lights.
Q. Is there a place to run the wiring for the lights?
A. Yes. Holes are pre-drilled to run the wiring inside the bull bar.
Exhaust Tips:
Q. What sizes can I get them in?
A. Our tips are available in two sizes: 4”x5”x12” and 5”x6”x12”
Q. Is the webbed sleeve welded to the tip or is it removable?
A. It is a bolt-on application and is removable.
Q. Do the tips bolt on or do they need to be welded on?
A. Our exhaust tips are a bolt-on application.
Shipping:
Q. Why is shipping so expensive?
A. Products such as our headache racks are not only heavy but large. They fall into the "oversized package" category of shipping
companies. These shipping companies add a hefty tariff for oversized packages which, unfortunately, is beyond our control. We do our
best to keep shipping rates as low as possible and do not profit on shipping charges.
© 2012 Aperture Studios for Spyder Industries, LLC. All rights reserved.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
