There are 3 ways to order. You can order online, over the phone or through an authorized dealer (which you can find by doing a zip code search on our dealer page).
- FAQ - Backup
FAQ - Backup
It will fit with any inside bed rail tonneau cover. Just be sure to order your rack with the 10" standard (tonneau compatible) mounting brackets.
Yes. Be sure to order your headache rack with the 24" toolbox compatible mounting brackets. .
Our web, deer, elk and other inserts are cut out of mild steel plate.
We recommend no more than 350 pounds of forward leaning weight and 1500 pounds of weight directly on top of the rack.
About 15-30 minutes.
While the headache rack utilizes the stake pockets to secure it, an additional hole must be drilled for the end of each bed rail.
The only tools you need are a ½” open end wrench, a ½” socket, and drill.
Yes, there is approximately 5" of movement to tilt it out away from or closer to your truck.
Installation time varies according to model, but usually 15 minutes to one hour.
We recommend having a full socket and box wrench set available. In some instances it may be necessary to loosen surrounding parts to ease installation.
No drilling involved. Our bull bar will mount using factory holes and attachment points.
There are four holes for mounting lights.
Yes. Holes are pre-drilled to run the wiring inside the bull bar.
Our exhaust tips are available in two sizes: 4”x5”x12” and 5”x6”x12”
Our exhaust tips are a bolt-on application.
Some of our products are not only heavy, but large, and considered oversized by shipping companies. They charge extra for oversized packages which is beyond our control. We keep shipping rates as low as possible and do not profit on shipping charges.